AUDIO CONTROL [Audio]: Settings related to audio

Description of settings

 

control

 

 

 

 

JOG CONTROL [> Jog ctrl]: Select whether to adjust the

OFF [>> OFF]: Do not adjust the audio playback speed.

audio playback speed during slow playback.

*ON [>> ON]: Adjust the audio playback speed.

 

 

 

SHUTTLE MUTE [> Shutl mute]: Set the audio muting

*OFF [>> OFF]: Not muted.

 

conditions during shuttle playback.

CUEUP or PREROLL [>> CUEUP]: Muted during cue-up or

 

preroll operations.

 

 

FULL [>> FULL]: Muted in shuttle mode.

 

 

AUDIO EDIT [> Audio edit]: Specify the type of editing for

*CUT EDIT [>> Cut edit]: Cut editing (Discontinuity in audio

audio signals.

signal may result at the editing point, causing noise during

 

playback.)

 

 

FADE IN/OUT [>> Fade]: Fade in and fade out

 

IN

OUT

 

DV PB ATT [> DV PB ATT]: When playing back a tape

OFF [>> OFF]: Do not attenuate.

 

recorded in consumer DV format, select whether to

*ON [>> ON]: Attenuate.

 

attenuate the audio output level.

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

This setting is valid only when the recording format setting is

 

 

 

 

 

DVCAM. This is not valid for DV format.

 

 

 

 

 

 

 

 

 

INTERFACE SELECT [Interface]: Settings related to

 

Description of settings

 

external interfaces

 

 

 

 

 

 

 

 

 

VIDEO OUTPUT [> Video Out]: Select the format of analog

 

*COMPOSITE [>> Composite]: Composite video signals

 

video signals to be output from the three VIDEO OUT

 

S-VIDEO [>> S-Video]:S-video (separated Y and C) and

 

connectors (Y/CPST, R− Y/C/CPST, and B− Y/CPST

 

composite video signals

 

(SUPER)).

 

 

Y–R, B [>> Y–R, B]: Y, R− Y and B− Y component video

 

 

 

 

 

signals

 

Note

 

 

 

 

 

 

When this menu item is set to Y− R, B, the B− Y/CPST (SUPER)

 

 

 

 

connector outputs the B− Y signal. In this case, changing the

 

 

 

 

setting of an internal switch allows the text data for

 

 

 

 

superimposition on the monitor screen to be output from the

 

 

 

 

right-hand REF. VIDEO IN connector (marked

). For more

 

 

 

 

information about this, consult your Sony dealer.

 

 

 

 

 

 

 

 

 

DIGITAL OUTPUT [> Digit Out]: Select the format of signals

 

*SDI [>> SDI]: SDI format

 

to be output from the SDI/SDTI (QSDI) OUT1/OUT2

 

SDTI [>> SDTI]: SDTI (QSDI) format

 

connectors (optional DSBK-1501 board required).

 

 

 

 

 

 

 

 

AUDIO OUTPUT [> Audio Out]: Select the channels for audio

 

*1/2 CH [>> 1/2CH]: Output channel 1 to the AUDIO OUT 1/3

 

output from the AUDIO OUT 1/3 and 2/4 connectors.

 

connector and channel 2 to the AUDIO OUT 2/4

 

 

 

 

 

connector.

 

 

 

 

 

3/4 CH [>> 3/4CH]: Output channel 3 to the AUDIO OUT 1/3

 

 

 

 

 

connector and channel 4 to the AUDIO OUT 2/4

 

 

 

 

 

connector.

 

 

 

 

 

REMOTE I/F [> Remote I/F]: When remote-controlling this unit

 

*9PIN [>> 9PIN]: Remote-control via the REMOTE connector.

 

with the LOCAL/REMOTE switch set to REMOTE, select

 

i.LINK [>> i.LINK]: Remote-control via the i.DV IN/OUT

 

either the REMOTE connector or i.DV IN/OUT connector

 

connector.

 

(optional DSBK-1501 board required) for connecting a

 

 

 

 

remote control unit.

 

 

 

 

 

 

 

 

 

 

 

Settings Menu 4 Chapter

Menu Contents 75