Playback and Recording 2 Chapter
If the REC INHI indicator lights:
It indicates that the REC/SAVE switch of the loaded cassette has been set to SAVE. Press the EJECT button in the tape transport control section to remove the cassette, then set the REC/SAVE switch to REC and reload the cassette.
Note
When ejecting and loading cassettes, make sure that the unit has been powered on.
2 Hold down the REC button and press the PLAY button.
This puts the unit into recording mode, and the tape starts moving.
3 Press the PLAY button on the player.
The player starts the playback operation, at which point this unit starts recording the input playback signals.
Cautions
•Once you have started recording, you cannot change the audio mode or recording format.
•If on a tape there is a point where the audio mode is switched, it is not possible to carry out insert editing over a section including that point.
If the following indicators light when a cassette is loaded
Indicator | It means: |
Cassette memory indicator | The loaded cassette contains a cassette memory. |
|
|
CL indicator | There is ClipLink log data stored in the cassette |
| memory on the loaded cassette. |
| Caution |
|
| With such a cassette, carrying out recording destroys | |
| the ClipLink log data. | |
|
| |
NO EDIT indicator | • The recording format of the tape is DV, or a | |
| DVCPRO tape is inserted. | |
| Replace the tape with one that has been recorded | |
| in DVCAM format. | |
| • The recording format selected on this unit is DV | |
| (SP). In this case, you cannot use the editing | |
| functions. | |
During editing operation
The audio recording mode selected on this unit does not coincide with that of the tape.
In this case, set the unit for the same audio recording mode as with the tape.
However, If your current purpose is recording only, you can use the tape as it is.
For more details, see “Troubleshooting” on page 106.
38 Recording