Use the following as reference information when setting the EE OUT PHASE menu item (see page 71).
THROUGH mode
In this mode, the LTC signal is output with the phase synchronized with the input time code signal. This mode is appropriate when recording signals from multiple devices on a number of VCRs.
When the camcorder is in genlock mode, the time code precision is ±0 frames. When the camcorder is not in genlock mode, it is ±1 frame.
VIDEO INPUT PHASE mode
The time code output signal is synchronized with the input video signal.
This mode is appropriate when the output from a single device is recorded on a number of VCRs. The connections are
In this mode, the same time code is recorded on all of the VCRs 1 to n.
Note
The optional boards (see page 11) corresponding to the input signal formats to be used are required.
Note
The optional boards (see page 11) corresponding to the input signal formats to be used are required.
VIDEO OUT
VIDEO IN
VIDEO LOOP THRU
TIME CODE IN
TIME CODE OUT
Camcorder 1
Camcorder 2
VIDEO IN
AUDIO IN
TIME CODE IN
TIME CODE OUT
VIDEO IN
AUDIO IN
TIME CODE IN
TIME CODE OUT
VIDEO IN
Output device (VCR, camera, etc.)
VIDEO IN
VIDEO LOOP THRU
TIME CODE IN
TIME CODE OUT
VIDEO IN
VIDEO LOOP THRU
TIME CODE IN
TIME CODE OUT
Settings Menu 4 Chapter
Camcorder n
AUDIO IN
TIME CODE IN
TIME CODE OUT
Composite video or SDI (video and audio) signal 
Time code signal
Composite video or
Audio signal
Time code signal
Menu Contents 77