Sony DSR-200 operating instructions Wind

Symptom	Cause and/or Corrective Action
The tape does not move when	• CAMCORDER/VTR is set to CAMCORDER.
a video control button is	mSet it to VTR.
pressed.	• The tape has run out.
	mRewind the tape or use a new one. (p. 36)
	• The digital camcorder is updating the cassette memory data
	(only for DVCAM cassettes with cassette memory).
	mEject the cassette after the C MEMORY indicator
	disappears (p. 25).
The Steady Shot function does	• STEADY SHOT is set to OFF.
not activate.	mSet STEADY SHOT to ON. (p. 67)
The autofocusing function	• FOCUS is set to MANU.
does not work.	mSet it to AUTO. (p. 52)
	• Shooting conditions are not suitable for autofocus.
	mSet FOCUS to MANU to focus manually. (p.51)
The microphone does not	• LINE/MIC is set to LINE.
work while recording.	mSet it to MIC FRONT or MIC REAR.
Built-in microphone sound	• DIRECTION SELECT is set to 0°.
does not record in stereo when	mSet it to 90° or 120°.
monitoring by headphone or
line out jacks.
Audio dubbing does not work.	• The signal of recording tape is no condition to operate audio
	dubbing.
	mDub the tape into another DVCAM cassette in Fs 32k using
	A/V connecting cable. (p. 29)
Excessive high-pitched sound	• The picture has been recorded with BUILT-IN MIC set to
is heard when recording using	WIND.
the built-in microphone.	mWhen there is no wind, set it to off (green position). (p. 66)
The recording sound is weak	• AUDIO MIX in the menu is set to ST2.
or is not heard.	mSet it to ST1. (p. 42)
The date and time indicator	• Reset the date and time. (p. 79)
disappears.
The overlap function does not	• Set DIGITAL MODE to OVERLAP. (p. 44)
work.
D ZOOM does not work.	• Set DIGITAL MODE to ZOOM and D ZOOM in the menu to
	ON. (p. 41)
D ZOOM mode in the menu	• Set DIGITAL MODE to ZOOM. (p. 41)
system cannot be set to ON.
The slow shutter does not	• Set DIGITAL MODE to ZOOM.
work.
	(to be contunued)

Additional information

91

DSR-200 U/C 3-858-622-22(1). E