4-1-4 Making Audio Input Settings

Selecting the input audio signals

Select the input audio signals as follows:

When the video input is digital

When the video input signal is digital in SDI format, it is possible to select in a setup menu whether to use the audio signals included in the SDI signal, or analog signals input to the AUDIO IN or CAMERA connectors. The settings for channels 1 and 2 and for channels 3 and 4 are independent.

For details of the setup menu operation, see Section 6-3 “Setup Menu Settings,” items “INPUT 1/2” and “INPUT 3/ 4” in the <AUDIO> menu (page 6-4).

When the “ANALOG” setting is selected, choose the audio input signal in the same way as for analog video input signals.

When the video input is analog

If the video input is analog, regardless of the setup menu settings, the audio input is also analog. Use the CAMERA/LINE switches to select the analog signals for the audio input.

•To select the audio signal input to the CAMERA connector, move the switch to the CAMERA position.

•To select the audio signal input to an AUDIO IN connector, move the switch to the LINE position.

CAMERA connector

CAMERA/LINE switches

AUDIO IN connectors

Selecting the input audio signals

Recording the same audio signals on channels 3 and 4 as on channels 1 and 2

By means of a setup menu setting, it is possible to record the same audio signals on channels 3 and 4 and channels 1 and 2.

For details of the setup menu operation, see Section 6-3 “Setup Menu Settings,” item “DOUBLE REC” in the <AUDIO> menu (page 6-4).

Adjusting the recording levels

For analog audio inputs, it is possible to adjust the recording level.

1

4 7

2 3 5,6

Adjusting the recording levels

1 Set the audio input level switches to correspond with the input levels.

2 Press the REC button.

The unit switches to the E-E mode.

(Continued)

Recording 4 Chapter

Chapter 4 Recording 4-5