Recording 4 Chapter
Audio dubbing
| 3 | 3,5 | 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 4 | 1 |
Audio dubbing on the cue track
1 Switch the POWER switch on, and load a cassette.
2 Adjust the recording level of the audio source to be recorded on the cue track.
For details, see the section “Adjusting the recording levels” (page
3 Press the PLAY button to play back the tape, then press the PAUSE button at the point from which you wish to dub the audio.
This pauses the tape transport.
4 Press the CUE DUB button.
The indicator lights.
5 Press the PAUSE button once more.
This ends the pause, and starts the audio dubbing.
6 To end the audio dubbing, press the STOP button.
In place of steps 3 to 5 above, pressing the PLAY button and CUE DUB button simultaneously also starts the audio dubbing.