Recording 4 Chapter
4 Use the SHIFT button and ADVANCE button to set the user bit value.
SHIFT button: Cycles through the digits, flashing the digit to be changed.
ADVANCE button: Increments the value of the flashing digit.
Hexadecimal digits A to F appear in the seven- segment display as follows:
Digit | A | B | C | D | E | F |
|
|
|
|
|
|
|
Display | A | b | C | d | E | F |
|
|
|
|
|
|
|
5 Set the
Setting the user bits to reflect the real time
With this setting you can record the real time on the tape.
3 1,4 2
Setting the user bits to reflect the real time
1 Set the REAL TIME record/set switch to SET.
2 Use the REAL TIME insertion time code selection switch to select which time code to insert the real time user bit value in.
LTC
VITC
3 Use the SHIFT button and ADVANCE button to set the real time value.
SHIFT button: Cycles through the digits, flashing the digit to be changed.
ADVANCE button: Increments the value of the flashing digit.
4 Set the REAL TIME record/set switch to REC ON or OFF.
REC ON: During recording, the real time is recorded in the user bits.
OFF: The real time is not, in fact, recorded in the user bits, but the internal clock continues to operate, keeping the value in step with real time.
Checking the real time
1 Set the DISPLAY switch by the status indication panel to
2 Set the REAL TIME record/set switch to REC ON.
3 Set the DISPLAY switch in the time code setting controls to LTC or VITC.
Whether the real time is being inserted into the LTC or VITC depends on the setting made in step
2 of the procedure for setting the user bits to reflect the real time on the previous page.
Setting the time code value
3 1
2,6 4 5
Setting the time code value
1 Set the DISPLAY switch by the status indication panel to TC.
2 Set the