3-1 Power Supply

Getting 3 Chapter

Using a BP-L60 Battery Pack

A BP-L60 Battery Ppack provides about two hours of continuous recording (when the unit is operated with the MODE switch in the SAVE position, the CONFI switch in the OFF position, and the setup menu item “SDI OUT” set to “OFF”).

Before use, charge the battery pack using a BC-L100/ L100CE battery charger. Charging takes about two hours thirty minutes.

For details of charging, see the instructions provided with the BC-L100/L100CE.

Inserting the BP-L60 Battery Pack

Use the following procedure.

The adhesive label bound into the end of this book gives directions for replacing the battery pack. You can attach it to the cover of the battery pack compartment for reference.

Started

1 Open the cover of the battery pack compartment.

Battery pack compartment

Cover

2 Pull up the internal divider grids.

Divider

3 Insert the battery pack with its reverse side on the inside, and push until it clicks into place.

When the battery pack is inserted correctly, the catch automatically engages to lock it in place.

BP-L60 Battery Pack

Catch

Reverse side

4 Close the cover of the battery pack compartment.

3-2Chapter 3 Getting Started