Started Getting 3 Chapter
POWER switch
Powering on and off
Powering on and off
Use the POWER switch on the front panel to power the unit on and off.
Starting recording automatically at power on
In the SYSTEM 1 setup menu, set the
For details, see page
Check the remaining battery capacity in the status indication panel.
When the battery pack is fully charged (supply voltage at least 13 V for the
The relation between the number of displayed segments and the battery pack voltage is shown in the following figure.
BATT EF
13.0 V and above 12.5 to 13.0 V 12.0 to 12.5 V 11.75 to 12.0 V 11.5 to 11.75 V 11.25 to 11.5 V 11.0 to 11.25 V
Display segments and battery pack voltage (Using
BATT EF
16.0 V and above 14.5 to 16.0 V 13.0 to 14.5 V 12.5 to 13.0 V 12.0 to 12.5 V 11.5 to 12.0 V 11.0 to 11.5 V
Display segments and battery pack voltage (Using
As the battery capacity is used up, the segments disappear in turn from the right.
When the battery pack is almost exhausted, the leftmost segment and the “BATT” and “E” indications flash, and simultaneously the WARNING indicator flashes, accompanied by an intermittent warning tone. When the battery pack is completely exhausted, the WARNING indicator stays on, and the warning tone becomes continuous.