6-2 Basic Setup Procedure
Operations Setup 6 Chapter
Making setup menu settings
1 2,4,6 3,5,7
Making setup menu settings
1 Press the DISPLAY button in the adjustment controls once or twice until the setup menu appears in the display.
Pressing the DISPLAY button cycles the display through the video level meters, setup menus, and audio level meters. If the display is showing the video level meters or setup menus, and five minutes elapse without an operation, the display automatically reverts to the audio level meters.
2 Press the UP or DOWN button in the adjustment controls to align the asterisk cursor (*) with the required item (submenu).
Example: Top menu
SETUP MENU * <VIDEO 1> <VIDEO 2> <AUDIO>
<SYSTEM 1> <SYSTEM 2> <SYSTEM 3>
<TRACKING>
3 Press the SET button.
This displays the selected submenu. Further submenus are enclosed in angle brackets (<SETUP LEVEL> in the following example).
Example: <VIDEO 1> menu
VIDEO 1 *<SETUP LEVEL>
<Y/C SEP MODE> <BLANKING>
CAMERA STD/NSTD
EXIT
4 Press the UP or DOWN button to align the asterisk cursor (*) with the required item.
5 Press the SET button.
This allows the value for the selected item to be changed.
In cases where there are further nested submenus, repeat steps 4 and 5 as required.
Example: <SETUP LEVEL> menu
SETUP LEVEL |
|
*MASTER | 7.5 |
INPUT | MST |
V BLANK RM | ON |
OUTPUT | 0.0 |
EXIT |
|
6 Press the UP or DOWN button to change the setting.
7 When the required value is displayed, press the SET button.
This confirms the new setting. To continue by changing another setting, repeat from step 4.
Returning to the parent menu
Select the “EXIT” item, and press the SET button, or press the DISPLAY button.