5-2 Procedures for Playback

5-2-1 Normal Speed Playback

 

5-2-2 High Speed Searching

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 2

PAUSE

3

1

button

 

 

 

Playback at normal speed

1 Switch the POWER switch on, and load a cassette. 2 Press the PLAY button.

Video and audio playback starts.

3 Turn the AUDIO PB LEVEL control knobs to adjust the audio playback levels.

4 To end playback, press the STOP button.

Pausing playback Press the PAUSE button.

The PAUSE indicator flashes, and a color still picture appears on the video monitor.

To restart playback, press the PAUSE button once more.

If the unit remains in the paused state for eight minutes, the paused state is automatically ended to protect the tape, and the state is the same as after pressing the STOP button.

Connector panel

MODE switch

Front panel

4 2 1,3

High speed searching

1 Press the SEARCH button.

The SEARCH indicator flashes, and a color still picture appears on the video monitor.

2 • To search forward, press the F FWD button.

• To search back, press the REW button.

This starts a color picture playback at the speed selected in a setup menu item (approximately 2 times, 5 times or 8 times normal speed).

For details of the setup menu operation, see Section 6-3 “Setup Menu Settings,” item “SEARCH” in the <SYSTEM 1> menu (page 6-4).

3 Press the SEARCH button once more.

The SEARCH indicator goes off, and the DVW- 250/250P switches to fast forward or rewind mode. At this point, if the MODE switch on the connector panel is set to PB, color playback is provided up to a maximum speed of approximately 24 times normal. If the MODE switch is set to PB/EE, an E-E signal is output to the monitor, when the MODE switch is set to SAVE, there is no video output.

(Continued)

Playback 5 Chapter

Chapter 5 Playback 5-3