1-3 Getting the Best Performance from the Unit
Notes on operation and storage
Protect the unit from violent shocks
It is possible to damage the internal circuitry and mechanism or spoil the external finish.
After use
Turn the power switch off.
When not using the unit for a long period
Remove the cassette and batteries.
Operating and storage locations
Store the unit in a level place which is well ventilated. Avoid operation or storage in the following locations:
•In extremely hot or extremely cold conditions
•In extremely dusty conditions
•In very high humidity
•Where the unit will be subjected to severe vibration
•Close to strong magnetic fields
•Exposed to direct sunlight for long periods, or close to heating equipment
Cleaning the video heads
Use the Sony
Related manuals
In addition to this Operation Manual, the following manuals are available.
These should be consulted as necessary.
•Maintenance Manual Part 1 (supplied) Describes the maintenance of this unit.
•Maintenance Manual Part 2 (option)
Contains circuit diagrams and adjustment procedures required for the maintenance of this unit.
Overview 1 Chapter
Condensation
If you move the unit suddenly from a cold place to a warm place, or use it in a very humid location, condensation may form on the head drum. If the unit is operated in this state, the tape may adhere to the drum, and cause a failure or even permanent damage. Take the following steps to prevent this from happening:
•Remove the cassette before operating the unit in conditions where condensation is likely to form.
•If the HUMID indication is showing, condensation is present: wait until the HUMID indication disappears, and then insert a cassette.
•Do not load a cassette on which condensation has formed into the unit.
Chapter 1 Overview