Ejecting a cassette
1 Check that the unit is powered on.
2 Press the EJECT button. This ejects the cassette.
3 Remove the cassette.
4 Close the lid of the cassette compartment manually.
Ejecting a cassette when the unit cannot be powered on
When there is no power supply, for example because the battery pack is exhausted, to eject a cassette manually refer to the supplied Maintenance Manual Part 1.
2
3
1
4
Ejecting a cassette
Started Getting 3 Chapter
Loading a cassette
It is not possible to load a cassette unless the unit is powered on.
2 | Small cassette position |
3
1 |
|
|
Large cassette position |
Loading a cassette
1 Turn the POWER switch on.
2 Raise the lid of the cassette compartment.
3 Check that the “HUMID” indication is not showing in the status indication panel, then insert the cassette.
For details of the procedure when the “HUMID” indication is showing, see the section “Warning Indications” (page
When the cassette is fully inserted, the lid of the cassette compartment closes automatically.