Parts of Function and Location 2 Chapter

2-2 Connector Panel

5PHONE LEVEL control knob

This adjusts the level of audio output to the EARPHONE and HEADPHONES jacks.

6+48 V switches (DVW-250P only)

For each of the four channels, these turn on or off the 48 V microphone phantom power supply to the corresponding AUDIO IN connector. These switches are only effective when the following selections are made:

CAMERA/LINE switch: CAMERA position

Audio input level switch: –60 dB position

7CAMERA/LINE switches

For each of the four audio channels, these select the input.

CAMERA: the audio input to the CAMERA connector (see next page)

LINE: the audio input to the corresponding AUDIO IN connector

8Audio input level switches

For each of the four channels, these select the audio input level. There are three settings: –60, –20 and +4 dBu.

9AUDIO IN connectors (XLR 3-pin)

These input up to four analog audio signals from external microphones or other equipment.

0AUDIO OUT connectors

These output analog audio signals for the four channels to external equipment.

!¡ EARPHONE jack (stereo minijack)

Connect an earphone or stereo headphones equipped with a stereo miniplug.

The MONITOR SELECT switches determine the audio output.

When the WARNING indicator (see page 2-5)lights or flashes, a warning sound is sent to the earphone.

!™ HEADPHONES jack (stereo standard jack)

Connect stereo headphones with an impedance of 8 ohms.

The MONITOR SELECT switches determine the audio output.

When the WARNING indicator (see page 2-5)lights or flashes, a warning sound is sent to the headphones.

2-12Chapter 2 Location and Function of Parts