5-1 Preparations for Playback
5-1-1 Selecting the Sound to Be Monitored
Use the MONITOR SELECT switches to select the audio signals output from the EARPHONE jack and HEADPHONES jack during playback. When the CH- 3/4 OUT switch is in the MON position, these switches also select the audio output from channels 3 and 4 of the AUDIO OUT connectors.
Selecting the outputs from channels 3 and 4 of the AUDIO OUT connectors
Set the
MON: the signals selected by the MONITOR SELECT switches
LINE: the signals of audio channels 3 and 4
Playback 5 Chapter
1 2 3
4
1 Of the MONITOR SELECT switches, first select the position of the CUE/DA switch.
CUE: Monitor the audio from the cue track.
DA: Monitor the channels selected from the digital audio recorded on the tape.
2 If you selected the DA position in step 1, set the next MONITOR SELECT switch to choose the channels monitored.
1/2: Audio channels 1 and 2
3/4: Audio channels 3 and 4
MIX: A mix of those of the four channels for which the corresponding switches below are in the ON position.
3 If you selected the MIX position in step 2, set the switches on for the channels to be monitored.
4 Turn the PHONE LEVEL control knob to adjust the audio level of the output to the EARPHONE and HEADPHONES jacks.
5-1-2 Monitoring with a Television Without Video Input Connections
Connect the input connectors of an RF modulator to the RF signal output connectors (RFU DC OUT, VIDEO OUT and AUDIO OUT) on the connector panel.
For details of channels and antenna selector switching, refer to the operating instructions supplied with the RF modulator.
|
| AUDIO |
|
| OUT | OUT | RF modulator |
RFU |
|
| |
VIDEO DC |
|
|
|
OUT |
|
|
|
Input connectors |
| |
(video, RFU DC, |
| |
and audio) | Antenna | |
Channel selector | ||
| ||
switch |
|
Television
VHF antenna connector
Antenna selector
Playback 5 Chapter
Connections to an RF modulator
Chapter 5 Playback