Operations Setup 6 Chapter
Setup menu settings (Continued)
Top menu | Submenu items (nested | Function | Setting values |
|
item | submenus in angle brackets) |
| ||
|
|
| ||
<AUDIO> | INPUT 1/2 | Select audio input for channels 1 | ANA: analog audio input | |
|
| and 2 when digital video input is | DIGI: digital audio input | |
|
| selected. |
|
|
|
|
|
|
|
| INPUT 3/4 | Select audio input for channels 3 | ANA: analog audio input | |
|
| and 4 when digital video input is | DIGI: digital audio input | |
|
| selected. |
|
|
|
|
|
|
|
| EMPHASIS | Toggle emphasis on analog audio | OFF: no emphasis | |
|
| input. | ON: Apply emphasis. | |
|
|
|
|
|
| DOUBLE REC | Toggle simultaneous recording of | OFF: Record separate signals on | |
|
| audio channels 1 and 2 on | channels 1/2 and 3/4. | |
|
| channels 3 and 4. | ON: Record same signals on channels | |
|
|
| 1/2 and 3/4. | |
|
|
|
|
|
| EXIT | Return to top menu. | — | |
|
|
|
|
|
<SYSTEM 1> | PREROLL | Set the preroll time for editing | 0 to 10 seconds in 1 second steps | |
|
| using the REMOTE connector. |
|
|
|
|
|
| |
| POSTROLL | Set the postroll time for editing | 0 to 10 seconds in 1 second steps | |
|
| using the REMOTE connector. |
|
|
|
|
|
| |
| SEARCH | Select the tape speed in search | (Both forward and reverse) | |
|
| operations. | X2: 2 times normal speed | |
|
|
| X5: 5 times normal speed | |
|
|
| X8: 8 times normal speed | |
| Select whether to start recording | OFF: Do not start recording. | ||
|
| automatically at power on. | ON: Start recording. | |
|
|
|
| |
| EXIT | Return to top menu. | — | |
|
|
|
| |
<SYSTEM 2> | TC OUT | Select the signal output from the | GEN: time code produced by the time | |
|
| TC OUT connector. | code generator. | |
|
|
| AUTO: during recording (including | |
|
|
| mode), the time code produced by | |
|
|
| the time code generator; during | |
|
|
| playback, the LTC signal from the | |
|
|
| tape. | |
|
|
|
| |
| TC DELAY | Toggle the LTC phase correction | OFF: no phase correction to LTC signal | |
|
| for the output from the TC OUT | AUTO: Adjust phase of LTC signal to | |
|
| connector. | correspond to the video output. | |
|
|
|
| |
| REC RUN | Select time code recorded when | INT: time code produced by time code | |
|
| generator | ||
|
| RUN. | TAPE: time code played back from | |
|
|
| tape | |
|
|
|
| |
| EXIT | Return to top menu. | — | |
|
|
|
|
|
|
|
| (Continued) |