Basic Operations
Parts Description
Watching TV
Using Other Devices
Using “BRAVIA” Sync
Devices
Useful Functions
Using Internet
Using Home Network
Configuring Various
Settings
Troubleshooting
How to Use Bookmarks
© 2013 Sony Corporation
Font Size | |
|
|
Top Page > Troubleshooting > TV SideView Symptoms
TV SideView Symptoms
The TV cannot be turned on and controlled by using the TV SideView application when [Remote Start] is set to [On].
The TV cannot be turned on and controlled by using the TV SideView application when [Remote Start] is set to [On].
When devices that cause radio wave interference (microwave ovens, cordless phones, etc.) are placed nearby, the TV SideView function may not work. In this case, keep such devices away from the access point or TV, or turn them off.
In the following cases, the TV SideView function may not work. Turn on the TV and
-Turn on/off the access point power during TV standby mode
-Reset the access point during TV standby mode
-Change the access point channel during TV standby mode
The TV SideView function may not work with
The TV should be in the
Check the following has been set for your TV.
When the access point and TV are connected with wireless LAN
-
-
-[Remote Start] of [Home Network Setup] under [Network] is set to [On]
-TV is connected to the access point
-TV SideView application cannot be used if USB Wireless LAN Adapter is inserted When the access point and TV are connected with wired LAN
-[Remote Start] of [Home Network Setup] under [Network] is set to [On]
Top of Page
List of Contents
195