Using the i.LINK Control Panel

After you select an i.LINK device using the Device List, the TV displays the i.LINK Control Panel, which allows you to use the TV's remote to control the selected i.LINK device.

1If the i.LINK Control Panel is not already displayed, press i.LINK on the remote control.

If i.LINK is pressed while the TV is displaying an analog or digital channel

(not the i.LINK device), then the Device List will appear. Select the desired

device from the list and press to display the Control Panel.

2Move the remote control’s joystick V v B b to navigate through the options available in the i.LINK Control Panel.

3Press to select a desired option.

4Press EXIT to exit the Control Panel and view the i.LINK device full-screen.

To exit i.LINK mode, select DTV from the Device List or press CH+/-.

The DTV window appears only if the i.LINK menus were entered while watching a digital TV channel

The i.LINK Control Panel displays the signal from the TV to the left (if available), and the signal from the currently selected device to the right.

i.LINK

SETUP

i.LINK

SETUP

SETUP

87

Page 88
Image 88
Sony KDP-57W5550, KDP-65W5550, KDP-51W5550 operating instructions Using the i.LINK Control Panel