Sony KDP-51W5550, KDP-65W5550, KDP-57W5550 operating instructions Adjusting the Convergence Manually

Adjusting the Convergence Manually

zFor details on using the Setup Menu, see page 103.

The Convergence feature gives you more control over the picture’s convergence than the Flash Focus feature, allowing you to fine-tune the convergence.

✍Before adjusting the convergence manually for the first time, you must first perform Flash Focus (as described on page 42).

1	Press MENU to display the Menu.
2	Move the joystick B or b to highlight the Setup icon and press	Setup
	.
3	Move the joystick to highlight Convergence and press .
	A pattern of white crosses appears, with a yellow around one
	of the crosses. Aligned crosses (which do not need adjustment)
	look white and have little or no red or blue showing. Crosses that
	are not aligned show red or blue shades beyond their edges.
		SETUP

			-	--	-
Full/Normal					SETUP
Move	<	<	Select:		End: Menu
	<<

	You can scroll up and down through the 9 x 7 field of crosses to			SETUP
	manually converge all portions of the screen.
4	Using the joystick, move the	to surround a cross that you want
	to adjust. Press . The changes to red.
5	If the cross that you selected has red edges, move the joystick
	until the red image is replaced with a white cross. Once you have
	finished this (or the cross does not have red edges), press		. The
	changes to blue.
6	If the cross you selected has blue edges, move the joystick until			SETUP
	the blue image is replaced with a white cross. Once you have
	finished this, press . The	changes to yellow again.
7	Repeat steps 4 to 6 to adjust other crosses. When finished, press
	MENU to exit the Setup Menu.

43