Sony KDP-57W5550, KDP-65W5550, KDP-51W5550 operating instructions Infrared Receiver, Channel button

ItemDescription

1MEMORY STICK When lit, indicates that the Memory Stick is being

ACCESS LED read. (Do not remove the Memory Stick when the

		indicator is lit.)
2	MEMORY STICK	Memory Stick insertion slot. For details, see “Inserting
		and Removing a Memory Stick” on page 69.
3	POWER	Press to turn on and off the TV.
4	Infrared Receiver	Receives IR signals from the TV’s remote control.
	(IR)
5	TIMER/	When lit, indicates one of the timers is set. When the
	STAND BY	timer is set, this LED will remain lit even if the TV is
	LED	turned off. For details, see page 104.

6i.LINK STANDBY When lit in orange, indicates that i.LINK Standby is

LED on. For details, see page 105.

7-CHANNEL+Press to scan through channels. To scan quickly through channels, press and hold down either

CHANNEL button.

8	-VOLUME +	Press to adjust the volume.
9	TV/VIDEO	Press repeatedly to cycle through the video equipment
		connected to the TV’s video inputs.
0	FLASH FOCUS	Press to adjust the convergence (see page 42).

Setup

SETUP

SETUP

SETUP

SETUP

15