41
SETUP Setup SETUPSETUP SETUPSETUP
Setting Up the Channel List
After you finish connecting the TV, you need to run the Auto
Program feature, which automatically creates a list of available
analog and digital channels. The Auto Program screens appear when
you turn on your TV for the first time after hooking it up.

Using Auto

Program

To run Auto Program the first time you turn on your TV
1Press POWER to turn on the TV.
The Initial Setup screen appears.
2Using the joystick on the remote control, move the highlight to
the desired language, then press to select that language.
3When prompted to start Auto Program, press to select Yes.
Auto Program takes several minutes to complete. A progress bar is
displayed while the channel list is being created.
To run Auto Program again at a later time
❑Use the Auto Program feature as described on page 98.
To add individual digital channels
❑Use the Digital Channel feature as described on page 98.
To reset the TV to factory settings
1Press POWER to turn on the TV.
2Hold down RESET on th e remote control.
3Press TV POWER on the TV. (The TV will turn itself off, then back
on.)
4Release RESET.
AX1 PJ.book Page 41 Wednesday, April 30, 2003 2:13 PM