Click [V] at the right of the list and select the desired stamp character string from the list.
The Font dialog box appears.
Operation
Click [V].
You can embed a new character string as a stamp. For detailed information on how to add a character string, see “Adding new stamps” on page 27.
5 Specify how to embed a stamp by setting each item in the Stamp dialog.
A[Font]: Select a font for the stamp character string.
You can select any font for the stamp character string.
Click the [Font] button.
Specify [Font], [Font style] and [Size], and then click the [OK] button.
The Font dialog box disappears.
Notes
•You can specify the size other than those listed by entering the font size directly between 10 points and 500 points.
•Depending on the font, characters may not be displayed properly. In such a case, select another font. Changing a font may allow the characters to be displayed.
B[Color]: Adjusts the brightness of a stamp. You can adjust the brightness of a stamp in 11 steps. A stamp becomes lighter toward the Light direction. A stamp becomes darker toward the Dark direction.
C[Alignment]: You can select the page on which the stamp is to be embedded from among [First Sheet Only], [By sheet], and [By Page].
D[Horizontal Position] and [Vertical Position]: Specify the position of which the stamp is to be embedded. You can select a position from among nine positions in the horizontal direction and nine positions in the vertical direction, 81 positions in total. You can check the specified position on the Stamp dialog.
E[Angle]: Specify the print angle for the stamp. (You can specify the angle between
6 Click the [OK] button on the Stamp dialog box after settings have been completed.
The window returns to the Function tab.
30 Useful Functions