1 Push the MENU button.
The READY indicator goes off and the message “Ink Level” appears.
2 Push and hold the MENU button or BB button until the message “Print test page.” appears on the printer window display.
3 Push the SET button.
The message “Test print?/Yes_” appears.
4 Push the SET button.
The printer starts printing a test page.
While the printer is printing the test page, the following message appears.
When the printer finishes printing the test page, the message “Print test page./Test printing.” appears again.
5 Push the READY button.
The READY indicator lights in green, and the message “READY” appears on the printer window display.
6 Check whether there are any uneven spots or any blank spots.
Replacing the Ink
Cartridges
When the ink runs out, proceed as follows to replace the ink cartridges.
Recommended Ink Cartridges (not supplied)Color | Product name |
Black | |
|
|
Gray | |
|
|
•Be sure to remove the protective cap before using a new ink cartridge. If you don’t, you cannot load the ink cartridge correctly in the printer.
•Load the ink cartridge in the printer promptly after you remove the protective cap. If dust accumulates in the ink cartridge, this may choke the print head and cause a malfunction of the printer.
•Do not close the air hole located on the top of the ink cartridge. If the air hole is covered, the ink cartridge cannot spray the ink and this may cause a malfunction.
Air hole
•It is recommended that you use the ink cartridge by the recommended date noted on the carton of the ink cartridge. To maintain the best print quality, use up the ink cartridge within six months of opening it.
•If you refill the ink cartridge or modify it, we will not guarantee its operation.
•Be sure not to remove or load the ink cartridge except when replacing it.
•Be careful not to injure your fingers with pins when changing the ink cartridge.
•Replace the ink cartridge when the printer is turned on (the ON/STANDBY indicator is lit in green).
Maintenance
Replacing the Ink Cartridges | 43 |
|
|