Replacing the Head

Cleaning Roller

This section explains how to replace the head cleaning roller.

Use an EPA-5CR head cleaning roller (not supplied).

Notes

•When replacing the cleaning roller, keep the power of the printer on. Before replacement, be sure to remove the auto sheet feeder tray.

•When replacing the cleaning roller, be careful of ink stain around the head cleaning roller and the head cleaning unit. The ink may stain your hands and clothes.

•We recommend that you put on gloves when replacing the cleaning roller.

•Do not press buttons on the printer during

replacement.

1 Remove the auto sheet feeder tray.

Maintenance

2 Push the MENU button.

The READY indicator goes out and the message “Ink level/Black (BL)” appears on the printer window display.

3 Push the MENU button or the m/M button and hold it until the message “Replace roller.” appears on the printer window display.

4 Push the SET button.

The message “Replace?/Yes_” appears on the printer window display.

Cursor

If the message “Replace?/No_” appears

Display “Yes_” by pressing the m/M button, and then push the SET button.

5 Push the SET button.

The message changes from “Warming up” to “Ready to replace”, and then, after several seconds, the message “End?/Yes” appears.

Note

While the cleaning roller is being replaced, the message “Ready to replace.” or “End?/Yes.” appears.

At this time, do not open the main cover. If you open the main cover, this may cause the printer to malfunction.

6 Remove the used head cleaning roller in use as follows.

1Put on the glove supplied with the head cleaning roller.

46 Replacing the Head Cleaning Roller