3Insert the new head cleaning roller D until it clicks at both ends.
Note
The cleaning roller may come off it is not fully inserted.
8 Replace the head cleaning unit in the printer.
1 Slide the two tabs in the direction of the arrow
(B).
Maintenance
2Insert the head cleaning unit with the unit ejector attached into the printer horizontally as far as it will go until it clicks.
After it is inserted, push it in at two points so that it can not move around inside the unit.
Insert it horizontally.
Note
If it is not inserted completely, the unit cannot clean the head properly.
3Pull the two claws at the bottom of the unit ejector downward, and remove the unit ejector horizontally.
9 After confirming that the message “End?/Yes_” has appeared, push the SET button.
The printer starts cleaning and the message “Now cleaning head.” is displayed.
When the printer finishes cleaning, the message returns to “Replace roller.”
10 Push the READY button.
The READY indicator lights in green and the message “READY” appears on the printer window display.
The head cleaning roller replacement is completed.
11 Attach the auto sheet feeder tray as it was.
48 Replacing the Head Cleaning Roller