Recording on MDs
•When recording from a component connected to the ANALOG IN jacks with “Track Mark Off” selected or when recording from a DAT recorder or DBS tuner connected to the DIGITAL IN connector, the entire material may be recorded as a single track.
•When recording from a DAT recorder or DBS tuner connected to the DIGITAL IN connector, the recorder will mark a track number whenever the sampling frequency of the input signal changes, regardless of the track marking parameter setting .
zYou can mark track numbers even after recording has finished
See “Dividing Tracks” on page 45.
Note
If you turn off the recorder or disconnect the AC power cord, the recorder will store the last settings of “Track Mark” and recall them the next time you turn on the recorder.
Starting Recording With 6
Seconds of Prestored Audio
Data
(Time Machine Recording)
Whenever the recorder is in recording pause, the recorder’s buffer memory continuously stores the latest 6 seconds worth of audio data. When you press AMS (or T.REC), the recording then starts with the data in the buffer memory. Time Machine Recording thus allows you to avoid missing the beginning of material recorded live from an FM or satellite broadcast.
AMS
1Do steps 1 to 7 of “Recording on an MD” on page 18.
The recorder changes to recording pause.
2Start playing the program source.
3Press AMS (or T.REC) at the point where you want to start recording.
Recording starts with the 6 seconds of prestored data in the buffer memory, then continues recording via the buffer memory thereafter.
To stop Time Machine Recording
Press x.
Note
The storage of data in the buffer memory starts from the moment the recorder changes to recording pause. Thus, if you start recording less than 6 seconds worth of data will be recorded from the buffer memory.
24
