To Use Fade In/Fade Out
1Press MENU/NO while the recorder is stopped.
“Edit Menu” appears in the display.
2Turn AMS (or press ./> repeatedly) until “S. F Edit” appears in the display; press AMS or YES.
3Turn AMS (or press ./> repeatedly) until “Fade In?” or “Fade Out?” appears in the display; press AMS or YES.
4Turn AMS (or press ./> repeatedly) until the track number of the desired track appears in the display; press AMS or YES.
“Time 5.0s” appears in the display.
5While listening to the playback, Turn AMS (or press
./> repeatedly) to adjust the fade in or fade out times.
the section to fade in or fade out is played back repeatedly.
Fade time is adjustable in 0.1 second intervals, from 1 to 15 seconds. You cannot set the time longer than the track.
6Press AMS or YES.
“Edit OK?” appears in the display.
7Press AMS or YES.
Rewriting of the track is started.
During overwriting, “S. F Edit **%” appears.
When writing is finished, “Complete!” will appear for a few seconds.
To cancel the operation
In steps 1 to 5, press MENU/NO x.
To force a stop during writing
The portion Already written cannot be returned to its original state, but cancellation can be made with the following steps.
1During writing, press x (Stop), MENU/NO or CLEAR.
“Edit Stop?” will be appear in the display, then “No” will flash.
When “No” is displayed. press MENU/NO, YES or AMS to continue the overwriting.
2Turn AMS until “YES” appears on the display
Pressing YES or AMS stops the overwriting of the data. Press MENU/NO to continue the overwriting of data.
Notes
•Do not move the recorder or remove the AC power plug during this operation. The recording information will be damaged, and a good recording will not be made.
•Level change cannot be made with LP2 or LP4 mode recording tracks.
•Do not use damaged or dirty MDs. The recording sometimes cannot be properly completed.
•Repeated change of level will result in a deterioration of sound quality.
•If the level has been changed once, and then changed again to the original level, the recording level will not actually be returned to the original state.
•The “Undo” function cannot be used to return a track where the level has been changed to its original level.
Editing Recorded MDs
51
