Renaming a track or MD Z
1To rename a track or disc name, do the following:
•To rename a track
While the track number is displayed and the recorder is stopped, playing, paused or recording, press NAME.
•To rename a disc
When the total number of tracks is displayed and the recorder is stopped, press NAME.
The disc name is displayed.
2Press CLEAR, and the displayed track name or disc name is erased.
3Rename the track or disc. Do steps 5 to 8 of “Naming a track or MD using the controls on the recorder” on page 46, or steps 2 to 4 or “Naming a track or MD using the remote” on page 47.
4Press NAME
Erasing a track or disc name (Name Erase)
Use this function to erase the name of a track or disc.
1Press MENU/NO while the recorder is stopped, playing, or paused.
“Edit Menu” appears in the display.
2Turn AMS (or press ./> repeatedly) until “Name?” appears in the display; press AMS or YES.
3Turn AMS (or press ./> repeatedly) until “Nm Erase?” appears in the display; press AMS or YES.
4Turn AMS (or press ./> repeatedly) until the track number (when the erasing the track name) or “Disc” (when erasing the disc name) flashes; press AMS or YES.
“Complete!” appears for a few seconds, and the name is erased.
To cancel the operation
Press MENU/NO or x.
Erasing all names on the MD (Name All
Erase)
You can erase all the track names and disc name on an MD in a single operation.
1Press MENU/NO while the recorder is stopped, playing, or paused.
“Edit Menu” appears in the display.
2Turn AMS (or press ./> repeatedly) until “Name?” appears in the display; press AMS or YES.
3Turn AMS (or press ./> repeatedly) until “Nm All Ers?” appears in the display; press AMS or YES.
“Nm All Ers??” appears in the display.
4Press AMS or YES.
“Complete!” appears for a few seconds, and all names on the MD are erased.
To cancel the operation
Press MENU/NO or x.
zAll the recorded tracks and names of an MD can also be erased at the same time
For details, see “Erasing all the tracks on an MD” on page 42.
Editing Recorded MDs
49
