Sony MDS-E10 manual Do steps 1 to 6 of Recording on an MD on Press Music Sync, Press CD-SYNC Start

Synchro-recording With the

Audio Component of Your

Choice

(Music Synchro-recording) Z

The Music Synchro-recording allows you to automatically synchronize recording on the MD recorder with the playing of the selected ogram sour ce. The Track Marking function, however, will differ according to the program source. For details, see “Marking Track Numbers While Recording” on page 23.

M.ACCESS

CONTINUE SHUFFLE PROGRAM

1	2	3	4	5
6	7	8	9	10

11 12 13 14 15

16 17 18 19 20

21 22 23 24 25

>25

NAME CHAR NUM

MUSIC SYNC

RM-DR1J

1Do steps 1 to 6 of “Recording on an MD” on page 18.

2Press MUSIC SYNC.

The recorder changes to recording pause.

3Start playing the program source.

Recording starts automatically.

To stop Music Synchro-recording

Press x.

Note

During Music Synchro-recording, Smart Space and Auto Cut (page 22) will operate regardless of their setting.

Synchro-recording With a

Sony CD Player (CD

Synchro-recording) Z

When the recorder is connected to a Sony CD player or Hi- Fi component system, you can easily copy the contents of CDs to the MD using the recorder’s remote. As the same remote operates both the MD recorder and the CD player or CD player section of the component system, make sure to place the MD recorder and the CD player as close together as possible.

Note

•Some CD players do not allow you to synchronize CD recording with the remote of the recorder. In this case, use music synchro-recording on this page to synchronize recording on the CD player and recorder.

•To operate the recorder and CD player, unplug from the jacks of the recorder and remote and use the remote as the wireless remote (page 16).

M.ACCESS

CONTINUE SHUFFLE PROGRAM

1	2	3	4	5
6	7	8	9	10
11	12	13	14	15
16	17	18	19	20
21	22	23	24	25
>25
NAME	CHAR	NUM
CD SYNC
START
CD SYNC				CD SYNC
STOP				STANDBY
CD PLAYER			RM-DR1J
/

1Turn on the mixer (amplifier) and the CD player, and select CD on the mixer (amplifier).

2Do steps 3 to 6 of “Recording on an MD” on page 18.

3Insert a CD into the CD player and select the playback mode (Shuffle Play, Program Play, etc.) on the CD player.

4Press CD-SYNC STANDBY.

The CD player changes to play standby and the MD recorder changes to recording standby.

5Press CD-SYNC START.

The recorder starts recording and the CD player starts playing.

The track number and elapsed recording time of the track appear in the display.

If the CD player doesn’t start playing

Some CD players may not respond when you press CD-CYNC START. Press X on the CD player’s remote instead to start playing on the CD player.

Recording on MDs

25