Sony MDS-JB920 56EN, Table of Setup Menus, Note, To enter the Setup Menu, To return the settings to the initial values

Additional Information

Table of Setup Menus

You can make various settings on this deck by using Setup Menus. Operation related to each menu were explained in the previous sections. The table below outlines each menu, including the various parameters and initial settings.

Note

The menus you can use in stop mode, during play or while recording differ.

To enter the Setup Menu

While the deck is stopped, press MENU/NO twice to display “Setup Menu”, or

press MENU/NO to display “Edit Menu” and turn AMS until “Setup ?” appears in the display, then press AMS.

Menu number	Function	Parameters	Initial setting	See
01	Creates a program.	—	—	page 28
02	Sets the track marking function.	T.Mark Off, T.Mark LSyn	T.Mark LSyn	page 16
03	Sets the reference level of the input	LS(T) –72 to –0dB	LS(T) –50dB	page 16
	signal when “T.Mark LSyn” is
	selected in Setup Menu 02.
04	Turns the Auto Space and Auto	Auto Off, Auto Space, Auto Pause	Auto Off	pages 29
	Pause Functions on and off.			and 30
05	Turns the Smart Space and Auto	S.Space Off, S.Space On	S.Space On	page 14
	Cut Functions on and off.
06	Turns the Peak Hold Function on	P.Hold On, P.Hold Off	P.Hold Off	page 15
	and off for the peak level meters.
07	Sets the playing time during music	M.Scan 6 to 20s	M.Scan 6s	page 25
	scan.
08	Sets the duration of fade-in	F.in 1.0 to 15.0s	F.in 5.0s	page 20
	recording and playback.
09	Sets the duration of fade-out	F.out 1.0 to 15.0s	F.out 5.0s	page 20
	recording and playback.
10	Changes the playback speed by	Pitch –48 to +2	Pitch 0	page 32
	auto steps.
11	Fine controls the playback speed.	Pfine –98.5% to +12.5%	Pfine 0.0%	page 33
12	Changes the bit length of the digital	Din 24bit/20bit/16bit	Din 20bit	page 14
	input signal.
13	Changes the bit length of the digital	Dout 24bit/20bit/16bit	Dout 20bit	page 33
	output signal.
14	Sets the duration of the Sleep Timer. Sleep 30 to 120min		Sleep 60min	page 32
15	Turns the Sleep Timer Function on	Sleep On, Sleep Off	Sleep Off	page 32
	and off.

To return the settings to the initial values

Press CLEAR.

56EN