Controlling a Separately Available Sony CD Changer
To stop recording
Press pon the deck.
The CD changer and MD deck both stop.
Note
If a CD is not loaded to the selected disc number, “No Disc” appears in the display.
zThe deck copies CD text information (CD text and disc memos) as it is to the MD (Disc Memo Copy Function)
When the current CD is labeled, the CD disc and track titles are recorded as the MD titles. However, the disc title is not copied if the MD is already labeled.
zWhen “No Connect” appears in the display
Check the control A1 cable connection and make sure the CD changer mode selector is set to CD1. After checking, turn the MD deck and CD changer off and then on again, then reset the Mega CD Control mode.
zYou can use the REC IT Function in Mega CD Control mode
You can record a track on an MD while listening to a CD.
For details, see “Recording the Current CD Track” on page 21.
Notes
•The MD deck stops automatically if the remaining time on the MD runs out during the recording.
•The Disc Memo Copy Function may not operate for extremely short CD tracks.
•Text information may not be copied for some CDs.
•If the control A1 cable becomes disconnected during recording, turn the deck and CD changer off and on, reset the Mega CD Control mode, and then start recording over from the beginning.
While “TOC Writing” is flashing
Do not move the deck or pull out the AC power cord to ensure the complete recording. The deck is currently updating the MD Table of Contents (TOC).