Sony MDS-JB920 Recording on an MD, track, to record, Press 1/u, Basic Operations, Operations Basic, Insert a recordable MD, The STANDBY indicator turns off

Basic Operations

Recording on an MD

2 3 5 4 7

					MENU/	￿ AMS	± YES			REC LEVEL
					NO					DIGITAL	ANALOG
										4	5
											6
STANDBY							REC MODE	INPUT		–	+
										3	7
							STEREO	OPT1	DIGITAL	2	8
								•	•
							•	OPT2•	•
							•	COAX•	•
					CLEAR		MONO		•ANALOG	1	9
TIMER										0	10
						PUSH ENTER
REC OFF PLAY										REC
		MEGA	MUSIC	SCROLL/	DISPLAY/		0		)		r
		CONTROL	SYNC	CLOCK SET	CHAR
PHONES	PHONE LEVEL					EJECT
		FADER	PLAY MODE	REPEAT	TIME	§	·				p
	0	10

Monitor audio during recording

Even if you set REC MODE to MONO, the monitor signal does not become monaural.

	8	6
1	Turn on the amplifier and play the program source you want
	to record.
2	Press 1/u.
	The STANDBY indicator turns off.
3	Insert a recordable MD.

	With the arrow pointing this way			With the label side up
		If the MD has a recorded material on it, the deck will
		automatically start recording from the end of the last recorded
		track.
4		Set INPUT to the corresponding input connector.
		To record through	Set INPUT to
		DIGITAL OPTICAL IN1	OPT1
		DIGITAL OPTICAL IN2	OPT2
		DIGITAL COAXIAL IN	COAX
		LINE (ANALOG) IN	ANALOG
5		Set REC MODE to the mode you want to record in.
		To record in	Set REC MODE*1 to
		Stereo sound	STEREO
		Monaural sound*2	MONO

*1 If you switch REC MODE during recording or recording pause, recording stops.

*2 In the monaural recording, you can record about two times longer than in the stereo recording.

(Continued)

9EN

Operations Basic