When “No Connect” appears in the display
Check the control A1 cable connection and make sure the CD player mode selector is set to CD1.
z
T.REC MUSIC SYNC 0 )
CD-SYNC
STOP START STANDBY
CD PLAYERFADER
P = +
DIGITAL REC LEVEL
/ANALOG OUT LEVEL
1 Set the source selector on the amplifier to CD.
2 Do Steps 2 to 5 in “Recording on an MD” on page 9 to prepare the deck for recording.
3 Press ·on the CD player.
4 Press REC-IT when you hear a track you want to record.
Play returns to the start of the track and recording starts. The MD deck stops at the end of the track, but CD playback continues from the next track.
To stop recording Press pon the deck.
z The deck copies CD text information as it is to the
MD
When the current CD has CD text, the track titles are copied as the MD track titles.
= + r
REC-IT
P p
REC-IT
WRITE
NAME CHAR NUM
·
CLEAR P.HOLD
Recording the Current CD Track (REC-IT Function) Z
This function lets you record a track on an MD while listening to a CD.
This function operates only when you connect a Sony CD player with a CONTROL A1 jack to the MD deck using a control A1 cable. For details of CONTROL A1 connections, see page 6.
REPEAT A˜B A.SPACE M.SCAN
/ >25 ? ! ( )

Recording on MDs

Notes

•The titles of the extremely short CD tracks may not be copied to the MD.

•Text information may not be copied for some CDs.

While “TOC Writing” is flashing

Do not move the deck or pull out the AC power cord to ensure the complete recording. The deck is currently updating the MD Table of Contents (TOC).

21EN