Editing Recorded MDs
9Repeat Steps 7 and 8 until you have entered the entire title.
If you entered the wrong character
Press 0or )until the character to be corrected starts flashing, and repeat Steps 7 and 8 to enter the correct character.
To erase a character
Press 0or )until the character to be erased starts flashing, then press CLEAR.
To enter a space
Press AMS while the cursor is flashing.
10Press YES.
This completes the labeling procedure and the title appears in the display.
To cancel labeling
Press MENU/NO or p.
Note
You cannot label a track or an MD while you are recording over an existing track.
Copying a track or disc title
You can copy a track or disc title to use it as a title of another track or the disc title within a disc.
1Press MENU/NO to display “Edit Menu”.
2Turn AMS until “Name ?” appears in the display and press AMS or YES.
3Turn AMS until “Nm Copy ?” appears in the display.
4Press AMS or YES.
5Turn AMS to select “Disc” to copy the disc title, or the track whose title you want to copy and press AMS or YES.
If “No Name” appears in the display
The disc or the track has no name.
6Turn AMS to select “Disc” for disc title or to specify the track number to copy a title, and press AMS or YES.
“Complete!!” appears for a few seconds to indicate that the copying operation is completed.
If “Overwrite?” appears in the display
The disc or track you selected in Step 6 above has a title. If you continue the title copying, press AMS or YES.
To cancel title copying
Press MENU/NO or p.