Playing MDs
Pausing after each track (Auto Pause)
When the Auto Pause Function is on, the deck pauses after playing each track. Auto Pause is convenient when recording single tracks or multiple, nonconsecutive tracks.
Select “Auto Pause” instead of “Auto Space” in Step 3 on “Inserting blank spaces while recording to tape” on page 29.
zYou can turn on the Auto Pause Function using the remote Z
While the deck is stopped, press A.SPACE repeatedly until “Auto Pause” appears in the display.
To restart playback
Press · or P.
To cancel Auto Pause
Fading In and Out (Fader)
You can gradually increase the playback level of the signal output to the LINE (ANALOG ) OUT jacks and the PHONES jack at the beginning of a playback (fade- in playback) or gradually decrease the playback level at the end of a playback
This function is convenient when, for example, you want to start or end playback in the middle of the track.
Z 21 – 22 23 . 24 , 25
REPEAT A˜B A.SPACE M.SCAN
/ >25 ? ! ( )
| WRITE | CLEAR P.HOLD |
NAME | CHAR | NUM |
| · | P | p |
|
|
| |
= | + | r |
|
|
| T.REC | MUSIC SYNC |
0 | ) |
|
|
|
|
| |
STOP | START STANDBY |
| |
| CD PLAYER | FADER |
P = +
DIGITAL REC LEVEL
/ANALOG OUT LEVELFADER
FADER
Cancelling the function through a menu operation on the deck
Do Steps 1 to 3 in “To cancel Auto Space” on page 29.
Cancelling the function using the remote Z
While the deck is stopped, press A.SPACE repeatedly until “Auto Off” appears.
Note
If you turn off the deck or disconnect the AC power cord, the deck will recall the last setting of the Auto Space and Auto Pause Functions the next time you turn on the deck.
Fade-in playback
During playback pause, press FADER at the position where you want
Zin “Fade Z3.2s” flashes and the deck performs fade- in playback until the counter reaches to “0.0s”.
Fade-out playback
During playback, press FADER at the position where you want
zin “Fade z3.2s” flashes and the deck performs fade- out playback until the counter reaches “0.0s”.
The deck changes to playback pause when
Note
The signal level output to the digital output connector does not change.
zYou can set the duration of
Do Steps 1 to 5 in “You can set the duration of the fade- in and