Sony MDS-JB920 Dividing Recorded Tracks (Divide Function), 42EN, To cancel the Divide Function, To cancel the Divide Function, Dividing a track after selecting the track

Editing Recorded MDs

Dividing Recorded Tracks (Divide Function)

With the Divide Function you can mark a track number at places that you want to randomly access afterwards. Use this function to add tracks to MDs recorded from an analog source (and therefore contain no track numbers), or to divide an existing track into multiple portions for locating positions in the middle of a track. When you divide a track, the total number of tracks on the MD increases by one and all tracks following the divided track are renumbered.

Example: Dividing track 2 to create a new track for C

Track	1	2		3
number
	A	B	C	D
Dividing			Track 2 is divided and a
Dividing		2	new track is created for C
	1	2	3	4
	A	B	C	D
		MENU/NO		YES	0/)
				0	)	r
				§ ·	P	p

AMS ±

Dividing a track after selecting the track

1While the deck is stopped, playing, or pausing, press MENU/NO to display “Edit Menu”.

2Turn AMS until “Divide ?” appears in the display, then press AMS or YES.

3Turn AMS to select the track to be divided and press AMS or YES.

“-Rehearsal-” appears in the display and the deck plays back the selected track from the beginning.

4While monitoring the sound, turn AMS to find the point to divide the track.

You can select the unit by which the starting point is shifted. Press the 0or )button to select

frame, second, or minute.

For frame, the number of frames appears when you turn the AMS control; for second and minute, “s” or “m” flashes in the display.

5Press AMS or YES when the position is correct. “Complete!!” appears for a few seconds and the newly created track begins playing. The new track will have no track title even if the original track was labeled. The total number of tracks in the music calender increases by one.

To cancel the Divide Function

Press MENU/NO or p.

zYou can undo the Divide Function

Use the Undo Function immediately after you divided the track (see page 49).

zYou can divide a track while recording

Use the Track Marking Function (see page 16).

Dividing a track after selecting the dividing point

1While playing the MD, press AMS at the point where you want to create a new track. “—Divide—” and “-Rehearsal-” alternate in the display and playback continues from the position you selected.

2To make fine adjustment on the dividing position, do Step 4 in “Dividing a track after selecting the track” on this page.

3Press YES.

“Complete!!” appears for a few seconds and the newly created track begins playing.

To cancel the Divide Function

Press AMS, MENU/NO or p.