Perform tests (1) to (6) consecutively.
(1) Testing the tape transport functions
1 | Set the VTR SAVE/STBY switch to SAVE and check that the VTR | |
|
| SAVE indicator in the viewfinder goes on. |
2 | Set the VTR SAVE/STBY switch to STBY and check that the VTR | |
|
| SAVE indicator in the viewfinder goes off. |
3 | Set the | |
|
| |
6 | 4 | Set the DISPLAY (LCD) switch to CTL. |
| 5 | Press the VTR START button and check the following points. |
| ||
|
| • The tape reels are turning. |
|
| • The counter indication is changing. |
|
| • The REC indicator in the viewfinder is on. |
|
| • The RF and SERVO indicators on the display panel are off. |
6 | Press the VTR START button again and check that the tape stops | |
|
| and that the REC indicator in the viewfinder goes off. |
7 | Repeat the checks of steps 5 and 6, this time using the VTR button | |
|
| on the lens. |
8 | Press the RESET button and check that the counter display goes to | |
|
| “00:00:00:00". |
9 | Turn on the LIGHT switch and check that the display panel is | |
|
| illuminated. |