Set the LINE/MIC/+48V ON switches to MIC.
Set the AUDIO IN switches to REAR.
Aim the microphones at a sound source.
Set the VTR SAVE/STBY switch to STBY.

(4) Testing the earphone and speaker

1

2 Turn the MONITOR control and check that the speaker volume changes accordingly.

3 Connect an earphone to the EARPHONE jack. Check that the speaker sound is cut off and that you can hear the sound from the microphone in the earphone.

4 Turn the MONITOR control and check that the earphone volume changes accordingly.

6 (5) Testing external microphones

1 Connect external microphones to the AUDIO IN CH-1/CH-2 connectors.

2

3

4

5 Check that the audio level meter in the display panel and the audio indication in the viewfinder reflect the changing sound level.

6-8Chapter 6 Maintenance