![](/images/backgrounds/209533/209533-25324x1.png)
4LEVEL
These controls adjust the audio levels of channels 1 and 2 when audio
input is from the AUDIO IN
5AUDIO SELECT
adjustment method select) switches
These switches select the audio level adjustment method for each of audio channels 1 and 2.
AUTO: Select this setting for automatic adjustment.
MANUAL: Select this setting for manual adjustment.
6AUDIO IN
These switches select the audio input signals to be recorded for audio channels 1 and 2.
FRONT: The input signal source is the microphone connected to the MIC IN connector.
REAR: The input signal source is the audio equipment connected to the AUDIO IN
You can also record audio signals in audio channels 3 and 4.
You can select the input signals to be recorded for audio channels 3 and 4 by using the AU REC CH 3/4 item on the VTR SETUP page of the MAINTENANCE menu.
The following three input signals are available:
1/2 CH: Records the same input signals connected to the AUDIO
AUTO: Records inputs signals other than the signals connected to the AUDIO
This is effective only when the
For example: When the
Chapter 2 Locations and Functions of Parts and Controls |