qf SHUTTER selector
Set this selector to ON to use the electronic shutter. Set it to SEL to switch the shutter speed or mode setting within the range that has been
previously set from the setup menu.2 When this selector is adjusted, the new setting will be indicated on the
setting change/adjustment progress message display area for about 3 seconds.
For more information about the shutter speed and mode settings, see Section
qg MIC/MENU knob
When the DISPLAY switch is set to ON or when the lens is using the automatic iris operation with the DISPLAY switch set to OFF, pressing and turning the MIC/MENU knob sets the iris override (±1 iris in 1/4 iris steps). The iris override setting returns to 0 when you turn off the camcorder, then on again.
qh AUTO W/B BAL (automatic white/black balance adjustment) switch
This switch activates the white balance and black balance automatic adjustment functions.
WHT: Automatic adjustment of the white balance. If the WHITE BAL switch is set to A or B, the white balance setting is stored in the corresponding memory. The memory can store the white balance setting for each CC filter.
BLK: Automatic adjustment of the black set and black balance.
Chapter 2 Locations and Functions of Parts and Controls