Chapter 6 Maintenance
5
Set the time code.
2
1
6 Set the F-RUN/SET/R-RUN switch to F-RUN, and check that the counter indication changes regardless of whether the tape is running.
7 Set the DISPLAY (LCD) switch to U-BIT, and check that the user bit value that was set is displayed.
Press the VTR START button again, and check that the tape stops and that the counter indication also stops changing.
For more information, see Section 4-4-2 “Setting the Time Code” (page 4-19).
3 Set the F-RUN/SET/R-RUN switch to R-RUN.
4 Press the VTR START button, and check that the tape starts and that the counter indication changes.
Set the user bits as required.
For more information see Section 4-4-1 “Setting the User Bits” (page 4-17).
(6) Checking the functions of the user bits and time code
6