3-4 Tele-File

The VTR section is compatible with the Tele-File memory label system. This system allows you to record the recording start timecode and shot markers onto the MLB-1M 100 memory label (not supplied).

Follow the procedure below to record the starting timecode and shot markers.

1 Insert the cassette onto which the MLB-1M-100 memory label has been attached.

2 Press the VTR START button or the VTR button on the lens.

3

At the instant the recording starts, the timecode of the recording start is recorded on the memory label.

3 While shooting, press the RET button on the lens to create the shot marker.

The timecode valid when you press the RET button is recorded on the label as the shot marker.

To confirm that the RET button is pressed

Set the DISPLAY switch to ON.

Whenever you press the RET button, the circle lights up on the right side of the REC lamp in the viewfinder.

Note

If you set the POWER switch to OFF within 1 second after a recording pause, the recorded data is not guaranteed.

To clear recorded data

For detailed information on how to clear data, see the maintenance manual.

....................................................................................................................................

1) Shot marker: Time code to be used as the editing point when editing.

Chapter 3 Recording and Playback 3-15