4 Set the user bits by using the SHIFT and ADVANCE buttons. SHIFT: Selects a digit to set. Each time you press the button, the

flashing digit moves one column to the right. ADVANCE: Increments the value of the flashing digit.

Hexadecimal digits A to F are displayed as follows:

Hexadecimal

A

B

C

D

E

F

Display

A

b

C

d

E

F

4

Resetting a modified numeric value to 00:00:00:00

To reset a numeric value that was modified, press the RESET button.

5 Set the F-RUN/SET/R-RUN switch to F-RUN or R-RUN, corresponding to the desired time code run mode.

The specified user bits will be recorded for both LTC and VITC.

Storing the user bits in memory

The user bits settings are automatically retained in memory even when the power is turned off.

4-18Chapter 4 Adjustments and Settings for Recording