3

Check that there are no obstructions near the cassette lid. Then press

 

 

the EJECT button to open the cassette lid.

4

After checking the points below, load the cassette and close the

 

 

cassette lid.

3

 

• The cassette is not write-protected.

 

• There is no slack in the tape.

 

 

 

Basic procedure for shooting: from adjusting the black balance and white balance to stopping recording

After turning on the power and loading a cassette, set the switches and selectors as shown below and begin operation.

Iris: Automatic

 

 

AUDIO SELECT

 

 

CH-1/CH-2:

 

 

AUTO

 

• •

 

Zoom:

 

 

Automatic

 

F-RUN/SET/R-RUN:

 

 

GAIN: Set as low

OUTPUT/DCC:

F-RUN or R-RUN

as possible.

CAM, DCC ON

(set as needed)

Switch and selector settings before shooting

3-6Chapter 3 Recording and Playback