Notes
•During the black balance adjustment, the iris is automatically closed.
•During the black balance adjustment, the gain selection circuit is automatically activated so you may see flickering on the viewfinder screen, but this is not a fault.
If automatic black balance adjustment cannot be made
If the black balance adjustment cannot be completed normally, the error message “ABB:NG” will appear for about 3 seconds on the viewfinder
4 screen. If this error message is displayed, retry the black balance adjustment. If the error message occurs again, an internal check is necessary.
Refer to the Maintenance Manual for information about this internal check.
Black balance memory
Values stored in memory are retained even when the camcorder power is turned off.