OUTPUT
BARS CAM
• •
• •
OFF ON
DCC
BARS, DCC OFF |
|
| |
A color bar signal is output and the DCC |
|
| |
circuit does not operate. For example, use |
|
| |
2 | |||
the setting for the following purposes. |
| ||
• Adjusting the video monitor |
| ||
• Recording the color bar signal |
|
| |
| |||
CAM, DCC OFF |
|
| |
The video signal from the camera is |
|
| |
output, and the DCC circuit does not |
|
| |
operate. |
|
| |
CAM, DCC ON |
|
| |
The video signal from the camera is |
|
| |
output, and the DCC circuit operates. |
|
| |
|
|
|
OUTPUT/DCC selector
ql WHITE BAL (white balance memory) switch
This switch determines the source of the white balance settings. PRST (preset): Adjusts the color temperature corresponding to the
position of the FILTER selector (outer knob). Use the PRST setting when you have no time to adjust the white balance.
A or B: When the AUTO W/B BAL switch is pushed to WHT, the white balance is automatically adjusted according to the current position of the FILTER selector (outer knob), and the adjusted value is stored in either memory A or memory B. (There are two memories for each
CCfilter, so a total of eight adjustments can be stored.) When the FILTER selector (outer knob) is at the same position as it was when this WHITE BAL switch was adjusted, the stored value is called from memory, and the camcorder automatically adjusts itself to that value.
When this switch is adjusted, the new setting will be indicated on the setting change/adjustment progress message display area of the viewfinder screen for about 3 seconds.
Chapter 2 Locations and Functions of Parts and Controls