Parts of Function and Location 2 Chapter
4Time data/menu display section
1Time data display
VIUB DF LTC VITC | 2F 59.94 |
|
| ||||
01:23:45:06 REM: 01: 23 : 45 78. 9% | |||||||
|
|
|
|
| IMX 525 | DOLBY NR | |
1 |
|
|
|
|
|
|
|
|
|
|
| CTL/TC | MENU |
| |
|
|
|
|
| TC |
|
|
|
|
|
|
|
|
|
|
2Menu display
1Time data display
This displays indicators relating to time data and other indicators.
Time data display area 1
Time data type indicator
DF indicator
LTC indicator
VITC indicator
Capstan lock mode indicator
Playback format indicator
System frequency indicator 525/625 indicator
DOLBY NR indicator
Speed indication area
Time data display area 2
Time data display area 1
Normally this displays a CTL count, time code value, or user bit value according to the setting in function menu HOME page for F4 (CTL/TC).
Time data type indicator
This indicates the type of data displayed in the time data display area 1.
LTC (longitudinal time code): Time code recorded on a longitudinal track on the tape
LUB: LTC user bit values
VITC (vertical interval time code): Time code recorded in the vertical blanking interval
VIUB: VITC user bit value
DF
This lights when values of
LTC indicator
Regardless of the display in time data display
area 1, this indicator lights when LTC values are being read.
VITC indicator
Regardless of the display in time data display area 1, this indicator lights when VITC values are being read.
Capstan lock mode indicator
This indicates the capstan lock mode (2F, 4F, or 8F) set in function menu page 4 or in setup menu item 106.
Playback format indicator
This indicator shows the current playback format. DB: Digital BETACAM format
IMX: MPEG IMX format, bit rate 50 Mbps, 8 audio channels
IMX4: MPEG IMX format, bit rate 50 Mbps, 4 audio channels
SX: Betacam SX format
SP: Betacam SP format
No display: Betacam format
System frequency indicator
Displays the current playback field frequency, and the bit rate of recording or
525/625 indicator
This indicator shows the number of scan lines for the television standard (525 (NTSC) or 625 (PAL)) selected using setup menu item 013.
Time data display area 2
Displays data types and time data such as the time code of edit points and the total time of that tape. The following data types are shown.
TOTL: Total time of the tape.
REM: Remaining time on the tape.
Depending on the setting of F5 (T INFO) on function menu page 3, either TOTL (TOTAL) or REM (REMAIN) is displayed.
The values displayed are approximate values calculated on the basis of the detected tape diameter. They are not precise to units of seconds.
Chapter 2 Location and Function of Parts |