Function Menu Item List | ||||
|
|
|
| |
The function menu has the following items. | In the “Setting” column of the table, the factory default | |||
|
|
|
| settings are indicated by an enclosing box. |
|
|
|
| |
HOME page |
| |||
|
|
|
|
|
Item |
| Setting |
| |
|
|
|
| |
F4 (CTL/TC) |
| Selects the time data to display in time data display area 1 (see page | ||
|
| TC: Playback time code read by the internal time code reader. The LTC or VITC time data type indicator | ||
|
| (see page |
| |
|
| UB: User bits data of playback time code. The LUB or VIUB time data type indicator lights, depending on | ||
|
| whether the time code is LTC or VITC.a) |
| |
|
|
| : The running time of the tape being played back, as calculated from a count of CTL signals recorded | |
|
| CTL | ||
|
| on the tape. The time is displayed in Hours:Minutes:Seconds:Frames format. | ||
|
|
|
| |
F5 (MENU) |
| Puts the system into setup menu mode (see Chapter 8). | ||
|
| When the current setup menu settings are the same as the contents of any of menu banks 1 to 3, or the | ||
|
| factory defaults, the corresponding indication (1), (2), (3), or (dflt) appears. | ||
|
| (1): Same as menu bank 1. |
| |
|
| (2): Same as menu bank 2. |
| |
|
| (3): Same as menu bank 3. |
| |
|
| (dflt): Same as factory defaults. |
| |
|
|
|
|
|
a) The selection of LTC or VITC depends on the setting of F6 (TCR) in function menu page 1 .
Page 1
Item | Setting | |||
|
|
|
|
|
F4 | (DF) | In 525/60 mode, selects either | ||
|
| the CTL counter. | ||
|
| DF: | ||
|
|
| : | |
|
| NDF | ||
|
|
|
|
|
F6 | (TCR) | Selects the type of time code to display in the time data display. | ||
|
| LTC: Display LTC. | ||
|
|
| : Display VITC when tape speed is 1/2 or less of normal speed, and LTC otherwise. | |
|
| AUTO | ||
|
| VITC: Display VITC. | ||
Chapter7 FunctionMenu
Chapter 7 Function Menu