Parts of Function and Location 2 Chapter

2-2 Connector Panel

1REF. (reference) VIDEO INPUT connectors (BNC type) and 75 Ω termination switch

Input a reference video signal. Input a video signal with chroma burst (VBS) or a monochrome video signal (VS). When using the loop-through connection set the switch to the OFF position, and otherwise to the ON position.

2COMPONENT VIDEO OUTPUT connectors (BNC type)

These connectors output analog component video signals (Y/R–Y/B–Y).

3COMPOSITE VIDEO OUTPUT connectors (BNC type)

These connectors output analog composite video signals.

When the setting of F4 (CHARA) in function menu page 4 is ON, connector 3 (SUPER) outputs a signal with superimposed time code, menu settings, alarm messages, and other text information.

3Digital audio output section

AUDIO OUTPUT(AES/EBU)

CH1/2 CH3/4 CH5/6 CH7/8

AUDIO OUTPUT (AES/EBU) connectors

AUDIO OUTPUT (AES/EBU) connectors (BNC type)

These connectors output up to four sets (8 channels: channels 1/2, 3/4, 5/6 and 7/8) of AES/EBU format digital audio signals.

4Digital signal output section

SDI SDTI-CP

OUTPUT 1

2OUTPUT 1

3(SUPER)

1 SDTI-CP OUTPUT connectors

 

2

2SDI OUTPUT connectors

1SDTI-CP (Serial Data Transport Interface) OUTPUT connectors (BNC type)

Output SDTI-CP format video and audio signals.

2SDI (Serial Digital Interface) OUTPUT connectors (BNC type)

These connectors output D1 format digital video/audio signals.

When the setting of F4 (CHARA) in function menu page 4 is ON, connector 3 (SUPER) outputs a signal with superimposed time code, menu settings, alarm messages, and other text information.

5Power supply section

1 AC IN connector

2 Ground terminal

1AC IN connector

Use the optional power cord to connect this to an AC outlet.

2Ground terminal Connect this to ground.

2-14Chapter 2 Location and Function of Parts