Playback 4 Chapter
4 Press the PLAY button or perform any other operation to exit the tape speed override mode.
See Section
For details of character information displayed on the video monitor screen, see the descriptions of F4 (CHARA) in function menu page 4 (page
(page
Carrying out playback in feed mode
Use the following procedure to carry out feed mode playback.
Speed display area
Z
2 3 1
1 Hold down the DMC EDIT button, and turn the search dial to set the playback speed.
When
In MPEG IMX playback, you can set the feed mode playback speed to 1 or 2 times normal speed by rotating the MULTI CONTROL knob with the DMC EDIT/FEED button held down. If the option is not installed, feed mode playback speed is 1 times normal speed.
2 Hold down the DMC EDIT button, and press the PLAY button.
Both buttons light, and playback in feed mode starts.
3 Where you wish to stop playback, press the STOP button.
Playback stops.
Auto feed playback
Auto feed playback is a function for feed mode playback of the segment between a specified IN point and OUT point.
By connecting this unit to a recorder VTR with a RECEIVE STANDBY function
1 On the HOME page of the function menu, set F4 (CTL/TC) to TC.
2 Start playback and, with the ENTRY button held down, press the STUNT IN button at the point where you want to set the IN point. To set the OUT point, press the STUNT OUT button with the ENTRY button held down.
3 With the DMC EDIT button held down, press LEARN button. (Before starting, refer to step 1 of the previous section “Carrying out playback in feed mode” and set the feed mode playback speed.)
The VTR prerolls to a point 5 seconds before the IN point (this can be changed with item 001 of the basic menu) and starts auto feed playback. Playback stops after postroll for 2 seconds beyond the OUT point.
The segment between the IN and OUT points is recorded on the recorder.